New Products-Commercial Oil Water Separator - News

We recently launched our latest commercial oil-water separator. This innovative product uses cutting-edge technology to help customers efficiently treat oil and pollutants in wastewater while meeting increasingly stringent environmental requirements.

Anhui Tian jian supply professional and honest service.

Performance characteristics

The new commercial oil-water separator combines efficient separation technology with low energy consumption design, and has the following advantages:

If you are looking for more details, kindly visit Kitchen Waste Decomposer Machine.

• High separation efficiency: Through multi-stage separation technology, it can effectively separate more than 99% of oil and fat.
• Modular design: convenient installation and maintenance, suitable for a variety of industrial scenarios.
• Intelligent monitoring system: real-time monitoring of separation effect to ensure stable operation of the system. Intelligent control, energy-saving operation.
• Environmental protection and energy saving: reduce operating costs and reduce emission pollution.

Function description of each component

Name Function Solid-liquid separation chamber Set up fine grid, spiral slag removal device, flow sensor, backwash device to separate solid residue Fine grid The grid spacing is 3mm, and the solid residue trapped by the grid is mechanically transported to the waste residue collection bucket by the spiral slag removal device Spiral slag removal device A reducer, spiral push shaft and slag outlet are set up to squeeze and filter the waste residue and then transport it to the waste residue collection bucket Backwashing device A backwashing pump, backwashing pipe and valve are set up to flush the solid-liquid separation cabin with treated sewage to avoid grid blockage and realize the cleaning function Oil-water separation chamber A guide plate, electric heating device, large-diameter inspection hole, drain valve and flow sensor are set up to separate oil from oily wastewater Guide plate Makes oil float on the upper layer of wastewater Electric heating device Heating rod and temperature control sensor are set up to maintain good fluidity of oil and keep the oil temperature within a reasonable range. Flow sensor The start and stop control of the spiral slag removal device is achieved by monitoring the water intake, reducing wear and energy consumption (optional for some models) Drain valve The bottom of the oil-water separation chamber is equipped with a drain valve to regularly discharge the sludge in the chamber Observation window The large-diameter observation window with a scraper device is used to observe the grease thickness in the grease storage area and to control the operation of the grease separation area at any time Control system With PLC touch screen, intelligent control, free setting of operating parameters, and automatic operation Grease/waste collection bucket Completely sealed to prevent odor from overflowing Ventilation pipe Maintain equipment pressure balance to prevent odor from overflowing

Installation Recommendations

Serial no. Name Serial no. Name 1 Water inlet pipe 6 Sewage lifting station 2 Gate valve 7 Sewage lift pressure pipe 3 Under-kitchen filter 8 Tap 4 Ventilation pipe 9 Commercial oil water separator 5 Drain valve 10 Sewage pump

1. The equipment should be as close to the drainage point as possible to reduce the length of the inlet pipe to prevent grease from condensing in the pipe.
2. It is recommended to connect the commercial oil water separator to the ventilation pipe
3. It is recommended to add a multi-stage filter screen to the kitchen water channel to prevent too much garbage from entering the grease separator.
4. It is recommended to add a sump and a sewage pump to the grease separator room, and temporarily drain the grease separation equipment and lifting pump during maintenance
5. It is recommended to add a gate valve and a secondary drainage pipe to connect with the lifter, and temporarily drain the grease separator during maintenance
6. When using a three-level mud and slag discharge system, it is recommended to discharge sewage into a septic tank, not directly into the municipal pipeline
7. The slope of the water inlet pipe is 2%
8. The grease separator room is not less than the installation surface of each model
9. The reserved installation channel can refer to the maximum component of the model

Accessories of commercial oil water separator

Pictures Description

• Filter pool overflow alarm
• Excessive water volume or filter mesh clogging causes the water level in the filter pool to rise, triggering the overflow alarm, manual intervention to prevent sewage from overflowing
• Waterproof and oil-proof alarm

• Oil/slag barrel weighing instrument
• Prevents oil/slag barrel from overflowing, alarms to remind you to change barrels
• Displays actual weight
• Alarm weight can be set

• Oil residue/slag bucket alarm sensor
• Oil residue/slag bucket full alarm, cannot identify oil or residue amount
• Waterproof and oil-proof alarm

• Air flotation system
• Equipped with micro bubble generator to promote oil and water separation
• N=50 W (220V/50HZ)

• Deodorizing and oil removal device removes odor and decomposes grease. Supporting fan. Positive/negative ion generator
• Positive and negative ion collector
• Micro-explosion generator
• N=50W (220V/50HZ)

• Remote monitoring system
• WIFI version
• 4G version

• Stainless steel escalator

For more wastewater treatment products, you canvisit the sewage lifting device page.