Pvc edge banding article topics

What is the difference between 1mm and 3mm edgebanding?

Posted on

The primary difference between 1mm and 3mm edge banding lies in their thickness or width. Both 1mm and 3mm edge banding serve similar purposes, but they are used in different situations and have distinct characteristics. Here are the key differences:

If you are looking for more details, kindly visit Lituo.

1mm Edge Banding:

1. Thickness: As the name suggests, 1mm edge banding is approximately 1mm in thickness. It is relatively thin compared to 3mm edge banding.
2. Appearance: 1mm edge banding provides a subtle, minimalist appearance. It doesn’t add much bulk to the edges of the material it’s applied to, resulting in a sleek and clean finish.
3. Applications: 1mm edge banding is often used when you want to maintain a very slim profile and create a minimalistic look. It’s suitable for lightweight panels or applications where a subtle edge treatment is desired.
4. Flexibility: Due to its thinness, 1mm edge banding is more flexible and can be easily applied to curved or irregular edges.
5. Conservation of Material: It’s an efficient choice for conserving material because it adds minimal width to the edges.

3mm Edge Banding:

See also:
What is the Advantage and Disadvantage of Waterproof Breathable Membrane

For more information, please visit 1mm PVC edge banding.

1. Thickness: 3mm edge banding is approximately 3mm in thickness, making it noticeably thicker than 1mm edge banding.
2. Appearance: 3mm edge banding provides a more substantial and pronounced appearance to the edges. It can create the look of thicker solid wood edges or add a decorative and bold element to the material.
3. Applications: 3mm edge banding is commonly used in applications where a thicker edge profile is desired. It can be used for heavier panels or to create a visual impact, such as on tabletops, cabinetry, or furniture.
4. Durability: The thicker profile of 3mm edge banding offers more protection to the edges against wear and impacts.
5. Straight Edges: It is typically applied to straight or slightly curved edges due to its greater thickness.

In summary, the choice between 1mm and 3mm edge banding depends on your design goals, the type of material you’re working with, and the desired aesthetic. If you want a minimalist and sleek look with minimal added thickness, 1mm edge banding is suitable. On the other hand, if you want to create a bold or substantial edge profile, or if you need additional edge protection, 3mm edge banding is a better choice.

This entry was posted in Pvc edge banding article topics and tagged pvc edge banding.

Zhi Shang edge banding manufacturer

We are edge banding manufacturers from China, if you are looking for edge banding suppliers, please contact us

Are you interested in learning more about Conductive ABS Edge Banding? Contact us today to secure an expert consultation!

I made about 50 feet of shop upper cabinets with quality melamine from my local hardwood supplier. My only regret is I cheaped out on edge banding, going with the 1mm thick, glue-backed edge tape that I ironed on. The adhesive seems good, but the edge banding is very delicate and easily damaged by just sliding/removing items from the cabinet shelves.

What do you use for more durable edge banding on your melamine projects?

As I'm limited on shop space, a Conturo or purpose-built edge bander isn't really in the cards for me now. I made a small bookshelf for the local Starbucks about 10 years ago.  I knew it would be a hostile environment. I made the bookshelf from 3/4” melamine clad particleboard.

I edged it with PVC iron on edge banding which quickly (about 6 months) was chipping badly.

I took the bookshelf back to my basement shop and removed the PVC tape.  I replaced it with oak thin edgebanding. 

The I trimmed it to width wit a sharp chisel.  Stained it an brushed on a couple of coats of oil based poly.

The keys to durability are

1.  I use a wood block to follow the hot iron and apply pressure while the adhesive is cooling.  It assures a good bond.

2.  I check the edges of the edgebanding with my thumb nail. I should not catch the edgebanding at all.  If I do, I use a hand sanding block to take off the excess.

3.  I hand sand the edgebanding so that they edges of the banding is at about a 30 degree angle.

4.  I brushed on the poly by hand (no taping).  I have no proof, but I think the poly helps with preventing the edgebanding from pulling off.

Of course, the look has to be OK too.  I took some pictures of it a few weeks back.  I will look for them and post

ryanjg117 said:

Lincoln said: I'd guess that your banding isn't 1mm, if it's delicate - melamine banding is 0.4mm thick, while ABS/PVC banding is 1mm thick and very durable.

Yep, you're right. Looks like my edge banding was .018" or about .4mm thick. So... just step up to the 1mm thick glue-back?

Yeah, it's the best option. Harder to trim etc, but well worth it. Down here in Aus we're mostly frameless cabinet construction and 1mm is industry standard.